5 images - View in gallery

Model 224xLC

The 224xLC dynamometer is the perfect choice for EFI tuning shop. Based on the 224x, the 224xLC offers the ease of use of an inertia dyno, along with the advanced testing capabilities of an Eddy Current Load Control dyno. The 224xLC Dynamometer features a 24" knurled, precision balanced drum, Eddy Current Load Absorption Unit, 2000HP measurement capacity and a max speed of 200 MPH.

The Dynojet 224xLC can perform load tests including step, sweep and custom road-load profiles in all gears and at any throttle position. This dyno can be configured for in-ground installation or above ground using a four-post lift or Dyno Ramps system.

Model 224xLC Standard Features and Equipment

 

Dynamometer Specifications Information

Below is a list of the Dynamometer specifications. In addition, you can download a pdf specs. document from below. For additional specifications related questions, please give us a call at: 01995 600500.

  Pre-installation Guide   Download
  Drums   1
  Above Ground Installation Guide   Download
  Drum Diameter   24 IN / 61 CM               
  Pit Installation Guide   Download
  Drum Width   81 IN / 205 CM
  Pit Dimensions   Download 
  Maximum Axle Weight   3000 LBS / 1361 KG
  Above Ground Four Post Lift Dimensions   Download   Air Requirements   100 PSI
  Maximum Horsepower / Torque   2000 HP / 2000 FT LBS   Operating Temp Range   32 to 158 F / 0 to 70 C
  Maximum Speed   200 MPH / 322 KPH   Timing Accuracy   +/-1 Microsecond
  Wheelbase Minimum   N/A   Drum Speed Accuracy   +/-1/100th MPH
  Wheelbase Maximum   N/A   RPM Accuracy   +/-1/10th RPM

 

Shop Requirements for Dynamometer

Forklift Requirements

To view our products, please select your bike above.