3 images - View in gallery

Model 200ix

Dynojet's cutting edge engineering delivers the precise horsepower measurements a technician needs to make quick and accurate evaluations of engine and drive-train performance. This allows you to maximize your shop's potential with increased sales, service efficiency, and shop credibility. The dyno's durable, low-maintenance construction ensures that you will be investing in many years of flawless tuning and troubleshooting. By eliminating the need for engine removal, the vehicle mounting time is as little as 5 minutes. A technician can then perform a simple test and examine the results right in the shop. Utilizing the Dynojet WinPep software, the dyno operator can evaluate the entire drive-train condition for the purpose of routine servicing or all-out performance.

The 200ix dynamometer adds an extra drum and sliding carriage to accommodate ATV's, Trikes, Side-by-Sides, and Motorcycle.

Above Ground Standard Features and Equipment

Pit Model Standard Features and Equipment

Dynamometer Specifications Information

Below is a list of the Dynamometer specifications. In addition, you can download a pdf specs. document from below. For additional specifications related questions, please give us a call at: 01995 600500.

  Pre-installation Guide   Download   Standard Carriage Wheelbase Minimum   66 IN / 167 CM
  200i/250i Installation Guide EX+ Hardware   Download   Standard Carriage Wheelbase Maximum   84 IN / 213 CM             
  200iP/250iP Installation Guide (EX Hardware)   Download   Extended Carriage Wheelbase Minimum   83 IN / 210 CM*
  Maximum Horsepower / Torque   750 HP / 750 FT LBS   Extended Carriage Wheelbase Maximum   102 IN / 259 CM*
  Maximum Speed   200 MPH / 322 KPH   Air Requirements   100 PSI
  Drum Diameter   18 IN / 45.72 CM   Operating Temp Range   32 to 158 F / 0 to 70 C
  Width   16.37 IN / 41.59 CM   Timing Accuracy   +/-1 Microsecond
  Drums   2   Drum Speed Accuracy   +/-1/100th MPH
  Maximum Axle Weight   N/A   RPM Accuracy   +/-1/10th RPM

  * Extended Carriage is Optional

Shop Requirements for Dynamometer

Forklift Requirements

To view our products, please select your bike above.