The 250i Load Control System was developed through years of experience with over 6,000 dynamometer installations world wide. The design is easy to operate and provide the function of steady state load control.
Dynojet's Load Control System uses the latest in Eddy Current Power Absorption technology, which combines with our easy to use software, so any technician can get repeatable, consistent results. The Load Control software provides the technician with the ability to control vehicle RPM or Speed at any throttle opening. Through our exclusive closed-loop software design, the vehicle is automatically held at your pre-determined setting.
Above Ground Standard Features And Equipment
Pit Model Standard Features And Equipment
Dynamometer Specifications Information
Below is a list of the Dynamometer specifications. In addition, you can download a pdf specs. document from below. For additional specifications related questions, please give us a call at: 01995 600500.
|Pre-installation Guide||Download||Standard Carriage Wheelbase Minimum||66 IN / 167 CM|
|200i/250i Installation Guide EX+ Hardware||Download||Standard Carriage Wheelbase Maximum||84 IN / 213 CM|
|200iP/250iP Installation Guide (EX Hardware)||Download||Extended Carriage Wheelbase Minimum||83 IN / 210 CM*|
|Maximum Horsepower / Torque||750 HP / 750 FT LBS||Extended Carriage Wheelbase Maximum||102 IN / 259 CM*|
|Maximum Speed||200 MPH / 322 KPH||Air Requirements||100 PSI|
|Drum Diameter||18 IN / 45.72 CM||Operating Temp Range||32 to 158 F / 0 to 70 C|
|Width||16.37 IN / 41.59 CM||Timing Accuracy||+/-1 Microsecond|
|Drums||1||Drum Speed Accuracy||+/-1/100th MPH|
|Maximum Axle Weight||N/A||RPM Accuracy||+/-1/10th RPM|
* Extended Carriage is Optional
Shop Requirements for Dynamometer
To view our products, please select your bike above.