Polaris

Power Vision CX

Power Vision CX for Polaris Off-Road vehicles is a performance tuner and data monitor that offers the latest flash tuning techno

logy, real-time data monitoring, and oth industry exclusive features. 

The Power Vision CX product suite includes a handheld flash device, vehicle interface cable, and Power Core (Windows PC based tuning and data logging application). 

 

POWER VISION CX OVERVIEW

  • Flash performance tunes via OEM diagnostic connector, no need to remove and send out ECU
  • Display vehicle data channels in real-time
  • Weather resistant for use in all conditions
  • High contrast display, viewable in direct sunlight
 

PERFORMANCE TUNE FEATURES

  • Fueling revised for maximum power and torque
  • Spark timing optimized for 91-93 octane fuel
  • Rev limit raised in high and low gears
  • Speed limit raised in high and low gears
  • Torque limiting functions reduced or eliminated
  • Revised drive-by-wire throttle profiles for high and low gears
  • Lower fan turn-on temps
  • Left foot brake mode enabled
  • Retains ADC and Turf mode where applicable

 

 

  • GIVES END USERS COMPLETE CONTROL OF THEIR CALIBRATION
  • START WITH THE ORIGINAL CALIBRATION, OR MODIFY / EDIT EXISTING CALIBRATIONS
  • MANAGE AND SEND TUNE FILES TO THE POWER VISION CX
  • REAL-TIME CELL TRACING
  • MONITOR AND LOG SUPPORTED DATA CHANNELS FROM THE ECU
  • TUNE LOCK OPTION TO PROTECT UNAUTHORIZED SHARING
C3 Tuning Software - Adjust all defined tables with live cell tracing, advanced table operations (Horizontal/Vertical/Bilinear Interpolate). Full support for Undo and Redo of all table operations for faster tuning and less time wasted backing up maps.

C3 OFFERS MORE CONTROL

Cell Trace Replay - Clicking on any point in a log file moves the cell trace cursor exactly where it was during the run. Quickly make adjustments without searching for the right axis values. Map Compare - Build tunes faster by leveraging previous work. Map Compare is a fully-featured comparison tool that shows the differences between separate tunes or individual tables within the same map (front cylinder vs rear cylinder tables, for example).
Table Math Scripting - Tune faster and smarter than ever before with repeatable, fully customizable tuning scripts. Tune directly from data logs and make rapid full-table adjustments and never worry about cell-by-cell adjustment ever again. Use pre-built Dynojet scripts, or build your own for full control." Table DRO (Digital ReadOut) - Don't waste another minute guessing values between cells! Hovering the mouse cursor calculates the exact value at that location in the table. No need to view channels outside C3, the Cell Tracer is calculated as well.

 

 

 

To view our products, please select your bike above.