Powersport Dyno Accessories & Upgrades

DYNOJET CERTIFIED CUSTOM TUNING TRAINING 

The Power Commander and Power Vision tuning courses certifies Dynamometer owners as “Dynojet Approved Power Commander Tuning Centers” and/or "Certified Power Vision Tuning Centers." The certification course is a training course held at Dynojet UK in Lancashire. The course consists of hands-on dyno training as well as classroom time. Upon completion, "Dynojet Approved Power Commander Tuning Centers" and "Certified Power Vision Tuners" are listed online and are the only Dynojet approved tuning centers for customers seeking custom Power Commander or Power Vision tunes created on a Dynojet dynamometer.

AFR-2 (DUAL AFR MONITOR) 

Measures real-time air/fuel ratios with integrated high-flow “pump” inside dyno (requires shop air).

O2 SENSOR KIT 

Includes one wideband O2 sensor with harness for use with AFR-2 for dual air/fuel readings. Available in a 6ft or 12 ft harness length.

ANALOG CHANNEL ACCESSORIES 

Analog Channel Accessories Analog Sensor Cable Kit (Used for connecting customer supplied 0-5v sensors to DynoWare RT Main Control Module – includes 4 harness kits).

Optional Harnesses:

  • 0-50psi Absolute Pressure Sensor
  • 0-100psi Relative Pressure Sensor

STEALTH EXTRACTION INTERFACE KIT 

Includes professional grade Riv-Nut tool, drill bit, and enough hardware for 50 applications (Includes bolts, washers, Riv-Nuts, specialty bolts, and billet manifold interfaces.)

STEALTH EXTRACTION INTERFACE KIT (NO RIV-NUT TOOL) 

Includes drill bit, bolts, washers, Riv-Nuts, specialty bolts, and billet manifold interfaces.

DYNOJET ON-BOARD DIAGNOSTIC (OBD) CABLES 

  • These cables allow the end user to plug into the On Board Diagnostic connector of the motorcycle to read and/or clear codes and view certain channels using a supplied OBD diagnostic tool. An over the counter OBD diagnostic tool is required. Make sure this tool is CAN compatible.

 POWER VISION TUNER KIT 

Dynojet now offers Power Vision Tuner Kits that include everything you need to start flash tuning Harley-Davidson® motorcycles using the online Power Vision Tune License system. These comprehensive kits are perfect for small independent shops, or franchised dealers looking to minimize the headaches and maximize profits. Use one Tuner Kit to tune as many bikes as you want with a single Power Vision and buy licenses as you need them!

 H-D FUEL TAP

Dynojet’s H-D Fuel Tap is a system for fuel injected Harley-Davidson motorcycles designed to measure and synchronize fuel pressure readings with other data while conducting dyno tests. Utilizes a precision 0-100 psi pressure transducer and quick disconnects for fast, easy installation and accurate results. Stop tuning around a “problem area” and ensure the fuel system is performing as designed.

  • Provides for a simple, fast interface to acquire fuel pressure from your Harley-Davidson motorcycle and accurate fuel pressure checks
  • Synchronize fuel pressure data with other dyno specific data, and Harley-Davidson J1850 or HD-LAN data*
  • Perfect for dyno shops that utilize Dynoware RT and Power Core software.
  • Solid nickel plated brass adapter and release valve, Steel housing 100PSI Gauge, Viton® O-Rings, and O-Ring lubricant
  • Fits 2001 and newer Harley Davidson® Bikes

POWER WHEEL CLAMP 

Motor driven wheel clamp controlled through the control panel for securing front wheel without stepping off the motorcycle.

POWER CARRIAGE 

Motor driven carriage controlled from control panel for adjusting wheelbase without stepping off the motorcycle.

MONITOR TRAY 

Bolts onto the control panel arm and holds the monitor, keyboard and mouse.

DUAL COOLING FAN SYSTEM 

Integrated cooling fans with adjustable arms. 1,800 CFM each fan.

TORQUE CELL MODULE

Measures real-time torque, and allows sweep, step and custom load simulation tests.

 IR-TEMP SENSOR KIT

Includes 1 0-500F sensor, magnetic base and mounting stand.

INDUCTIVE RPM CONNECTION KIT 

This new harness kit aids dyno operators in establishing engine RPM signals with select motorcycles. Each harness uses OEM style connectors, plugs in-line with the stock ignition system, and the non-loomed wiring makes it easy for the Dynojet Inductive RPM to clamp onto. Works with several motorcycles: Denso coil ignitions, Ducati, KTM, Polaris, Can-Am, BMW, Aprilia and Harley Davidson.

SECONDARY FOLDING RAMP 

Supplemental ramp for “x” model dynos (both ramps required).

PRIMARY FOLDING RAMP 

Gas strut assisted folding ramp bolts directly to the dynamometer.

Extended Carriage Option

Accommodates 102” wheelbase measured from rear axle to front tire.

 X UPGRADE

Allows dyno to additionally accommodate most other powersports platforms (ATV’s, Side-by-Sides, Go-Karts, and Trikes). Standard feature on “x” model powersports dynamometers.

EDDY CURRENT LOAD ABSORPTION UNIT

Allows load testing by close-looping on rpm, speed, acceleration, step tests, custom load profiles, road load simulation and percentage of load. (Included on 250i/250ix series models).

AIR BRAKE 

Air actuated disk brake used for slowing drum. *not necessary with 250i series dynos*