Model 424x LC2

The 424xLC2 features 2 x 24" knurled, precision balanced drums, 2x Eddy Current Load Absorption Units, measures up to 2000 HP, 2000 FT LBS, 200 MPH, and is capable of 1600HP peak absorption (in AWD) making it the most powerful load control dynamometer on the market.

Unlike inferior non adjustable wheelbase designs, the model 424xLC2 can adjust wheelbase with a push of a button from 88” to 140”. This allows the tires to contact the rollers evenly and in conjunction with the large drum diameter the 424xLC2 provides a virtually flat, stable surface for tire contact eliminating unnecessary tire slippage and deformation. The result is precise, repeatable data every time.

The 424xLC2 can operate in “inertia only” mode for assessing gains from minor bolt-on modifications, or utilize the duel eddy currant load absorption units for advanced load testing. Load tests include step, sweep and custom road-load profiles in all gears and at any throttle position. This system also eliminates any potential speed bias between the two drums when using the Dynojet speed balance feature.

Horsepower and torque are measured at each drum and can be displayed and/or logged independently or combined. This feature allows you to assess the vehicle’s power-split and can also aid in troubleshooting drive-train issues.

With the addition of the optional Linx System, the 424xLC2 allows you to test modern AWD vehicles without the fear of potentially damaging the center differentials, or activating intrusive stability control systems. It is also useful for those 2wd performance vehicles that require all four wheels to be rotating in order to avoid "reduced power mode’’.

Model 424xLC2 Standard Features and Equipment

• Measures 2,000+ HP / torque and up to 200MPH
• Tests vehicles in either two-wheel or all-wheel drive modes, bi-directional rotation
• Above-Ground or Pit installation accessories included
• Consists of two Model 224x chassis dynamometers
• PowerCore software suite with WinPEP 8 to interface (PC, printer, etc. not included)
• DynoWare RT dynamometer electronics and hardware
• 2 channels available for Automatic Conditions Measurement (absolute pressure, air temp, humidity) 1 sensor included
• 4 Analog Input Channels for 0-5v sensors (sensors and cables not included)
• 14 expansion ports for DynoWare RT accessories and DJ-CAN devices
• Pit or Above-Ground configurations.
• Air Actuated Brake System
• 10 button sample pendant for software and dyno control
• Ignition wire inductive tachometer pickup leads
• Electronically controlled wheelbase adjustment from (standard 88” to 130” or optional 98” to 140”)
• Auto Tie Down Package (straps, ratchets and ground hooks)
• Wheel Chocks
• Installation and operation manuals
• One year replacement parts warranty
• Free technical support

Dynamometer Specifications Information

Below is a list of the Dynamometer specifications. In addition, you can download a pdf specs. document from below. For additional specifications related questions, please give us a call at: 01995 600500.

Shop Requirements for Dynamometer

• 120 Volt, 15 Amp, Single Phase
• Requires 5CFM Air Compressor
• PC Running Windows 7 or higher (Not Included)

Forklift Requirements

• 5000lb Forklift with 6’ forks