Vehicle Selection

Model 250i

The 250i Load Control System was developed through years of experience with over 6,000 dynamometer installations world wide. The design is easy to operate and provide the function of steady state load control.

Dynojet's Load Control System uses the latest in Eddy Current Power Absorption technology, which combines with our easy to use software, so any technician can get repeatable, consistent results. The Load Control software provides the technician with the ability to control vehicle RPM or Speed at any throttle opening. Through our exclusive closed-loop software design, the vehicle is automatically held at your pre-determined setting.

Above Ground Standard Features And Equipment

Pit Model Standard Features And Equipment

Dynamometer Specifications Information

Below is a list of the Dynamometer specifications. In addition, you can download a pdf specs. document from below. For additional specifications related questions, please give us a call at: 01995 600500.

  Pre-installation Guide   Download   Standard Carriage Wheelbase Minimum   66 IN / 167 CM
  200i/250i Installation Guide    Download   Standard Carriage Wheelbase Maximum   84 IN / 213 CM             
  200iP/250iP Installation Guide    Download   Extended Carriage Wheelbase Minimum   83 IN / 210 CM*
  Maximum Horsepower / Torque   750 HP / 750 FT LBS   Extended Carriage Wheelbase Maximum   102 IN / 259 CM*
  Maximum Speed   200 MPH / 322 KPH   Air Requirements   100 PSI
  Drum Diameter   18 IN / 45.72 CM   Operating Temp Range   32 to 158 F / 0 to 70 C
  Width   16.37 IN / 41.59 CM   Timing Accuracy   +/-1 Microsecond
  Drums  1   Drum Speed Accuracy   +/-1/100th MPH
  Maximum Axle Weight   N/A   RPM Accuracy   +/-1/10th RPM

  * Extended Carriage is Optional

Shop Requirements for Dynamometer

Forklift Requirements