Vehicle Selection

Model 250ix

The 250ix Powersports Chassis Dynamometer provides the ultimate in powersports dyno tuning/testing capability. With 61 inch total drum with, and extra drum and sliding carriage, the 250ix can handle UTV's, ATV's, Karts, Trikes, and Motorcycles. Available for above-ground or pit installation.

Above Ground Standard Features and Equipment

Pit Model Standard Features and Equipment

Dynamometer Specifications Information

Below is a list of the Dynamometer specifications. In addition, you can download a pdf specs. document from below. For additional specifications related questions, please give us a call at: 01995 600500.

  Pre-installation Guide  Download   Standard Carriage Wheelbase Minimum   66 IN / 167 CM
  200i/250i Installation Guide   Download   Standard Carriage Wheelbase Maximum   84 IN / 213 CM             
  200iP/250iP Installation Guide   Download   Extended Carriage Wheelbase Minimum   83 IN / 210 CM*
  Maximum Horsepower / Torque   750 HP / 750 FT LBS   Extended Carriage Wheelbase Maximum   102 IN / 259 CM*
  Maximum Speed   200 MPH / 322 KPH   Air Requirements   100 PSI
  Drum Diameter   18 IN / 45.72 CM   Operating Temp Range   32 to 158 F / 0 to 70 C
  Width   16.37 IN / 41.59 CM   Timing Accuracy   +/-1 Microsecond
  Drums   2   Drum Speed Accuracy   +/-1/100th MPH
  Maximum Axle Weight   N/A   RPM Accuracy   +/-1/10th RPM
  Inner Standard Rear Axle Width   23 IN / 58.4 CM   Outer Standard Rear Axle Width   61 IN / 155 CM
  Inner IXW Rear Axle Width   35 IN / 89 CM   Outer IXW Rear Axle Width   73 IN / 185.4 CM

  *Extended Carriage is Optional

Shop Requirements for Dynamometer

Forklift Requirements